Avatar

Pann's Cosplay Adventures

@movedtopann-tacsigh / movedtopann-tacsigh.tumblr.com

Moved to @pann-tacsigh
Posts
Avatar
Avatar

Moooving.

I'm moving to @pann-tacsigh!! We're forming a duo cos team 'cause we do everything together lol. Find me there from now on! :D

Avatar
Anonymous asked:

Hi, I saw you at PMX as great lord Lucina with a grandmaster Robin, I was also dressed as Lucina (just her Normal outfit) but I was too shy to ask for a picture and I didn't know about the gathering >-

Ahhh don’t be shy! :D I love other FE cosplayers (especially Lucinas >o

But onto your question! I made her belts out of pleather! I sewed two pieces of pleather inside out, turned them right side out, then sewed them again along the edges so they lie flat. :D The buckles I made from a large, wooden curtain hanger/hole/thing, then I added apoxie around it to make it larger. I also used a dremel to sand the inside of the circle and the apoxied outside to make it look sharper. 

As for her shoulder guards...I actually made them out of syntra, which I HIGHLY do not recommend. LOL. If I were to do it again, I would make them out of EVA foam. The key to getting them not to slip off though is that I have a piece of fabric glued to the top of the shoulder guard. I pin it to my tunic so it keeps my pauldrons up. I can take photos to show you what I mean if you’d like! :D

#text posts#Anonymous
Avatar
Anonymous asked:

Was making the falchion hard? (Im asking because im planning to cosplay lucina/"marth" for sacanime)

I’m soooo sorry for the late reply, tumblr doesn’t like to notify me when I get messages. Dx 

My falchion was a bit of a pain to make, because I made it mostly out of wood. xD I took a wide piece of wood and sawed off pieces until the blade and hilt were approximately the correct width. I used a wide piece to account for the guard and the hole in the guard. @_@ After that it was....a lot of sanding....to sharpen the blade. A lot. It was a pain and took forever LOL. At least I had an orbital sander. 

I used a weird mix of craft foam, worbla, apoxie, and styrene to make the guard and pommel because I had no idea what I was doing and just kinda tried everything. XD I think if I were to do it again I’d use craft foam and either coat it with resin or worbla. Apoxie is a little fragile, pieces have broken off before. :( 

There are definitely easier ways to make it though! I’m just a dummy and like wooden weapons. LOL.

#Anonymous
Avatar
Anonymous asked:

hello!! your jiji cosplay is beautiful!! i also want to cosplay jiji and i wanted to ask where you bought the blue fabric, i've been looking everywhere and they're so expensive or just nonexistent :O !

Hi! I’m so sorry for the late reply, I haven’t been on tumblr at all ;o; I unfortunately got the fabric in Taiwan! My friend says she’s seen it online and in LA’s fabric district, but I myself have not. T_T I wish you the best! Good luck!

#Anonymous
Avatar
kiyomitsoo asked:

i just wanted to let you know that your jiji cosplay is literally the cutest thing ever ;;//v//;;

Avatar

Ahhhh thank you so much!! I’m glad you like my cosplay! >\\\\\\

Avatar
Anonymous asked:

Hi! Your Lucina cosplay looks awesome! What fabric did you use for the dress?

Thanks anon! :D For my tunic I used a dark navy suiting and lined it in a cheapish satin. ^o^ I uh, actually used stretch satin for the lining which I do noooot recommend. X_x Use not stretchy material for both body and lining, it makes things 5x easier. LOL.....

You are using an unsupported browser and things might not work as intended. Please make sure you're using the latest version of Chrome, Firefox, Safari, or Edge.