American Horror Story: Cult ~ episode 4: 11/9
Kai Anderson & Harrison Wilton
@katiecurstonnewbould94x / katiecurstonnewbould94x.tumblr.com
American Horror Story: Cult ~ episode 4: 11/9
Kai Anderson & Harrison Wilton
A little late, but still an important thing to see.
Not once have I ever said to myself, “you know, it WILL be interesting to see what the human canvas jury has to say.”
Follow @studentlifeproblems for more student memes!
Hi! I wanted to share with you the Dremel Work-Box I made! I made this to help keep the Dremel debris and dust from going everywhere when I am sanding polyhedral dice!
I went to Ikea and got a clear bin and lid for about $5. I then sat down at my work area and angled the box to myself. I marked about where my arms would comfortably sit while working.
Then I cut a hole on the front and then the side. This gives me extra room to work.
I took an old long sleeve tee and cut the sleeves off. I then duct taped the sleeves to the outside and fed the sleeves into the box.
I put on rubber gloves and ran the corded Dremel in through the right sleeve. With the gloves on I can now stick my arms into the box.
This lets me work and keep most of the dust and resin debris in the box! I put a damp paper towel on the bottom and an extra damp paper towel inside so I can periodically wipe off the Dremel if it gets dirty.
The closed box and sleeves keeps the crud i side and you can still easily see inside! I keep a small misting spray bottle nearby. When I’m done working and I remove the Dremel, I can spritz the water in the box to help keep dust from kicking up. Then I can easily use the damp paper towel to clean up the resin dust and debris safely!
I still highly recommend wearing a mask and gloves while working but this box should help you keep the majority of the crud from going everywhere in your workspace!
I hope this helps you with your workspace! A lot of folks on twitter liked this so I wanted to share it with you too! ✨💜✨
Have a rad day!
-Aron
That’s Louis Rossman, a repair technician and YouTuber, who went viral recently for railing against Apple. Apple purposely charges a lot for repairs and you either have to pay up or buy a new device. That’s because Apple withholds necessary tools and information from outside repair shops. And to think, we were just so close to change.
Follow @the-future-now
Reblog if you:
No one will know which is it
This guy inspired me to repair my own macbook. First of all, you should know that I am not… like, I have to look up HOW to look up what my computer specifications are. Tech, that ware either soft or hard, is not a subject in which I experience comfort or competence. But my puppy peed on my keyboard, and I asked the apple store, or the fucking mac cafe, or the godsdamn Computer House Chill Zone or whatever cute ass name they have for their bullshit store, and they said it would be TWELVE HUNDRED DOLLARS TO REPLACE MY KEYBOARD. I’m not even exaggerating.
So I asked the internet, well how hard IS it to repair? And I saw this guy’s video, and while I am no techie, I AM fueled by spite, so I was all “oh, they do that shit on purpose specifically so they can charge me $1200 bucks or make me buy a new computer hunh? FUCK THEM” and I bought all the tools I needed for about $25 and I bought all the parts I needed for about another $25 and I watched a few tutorial videos, and I replaced my own keyboard.
So, once you are doing the actual deed, it becomes pretty obvious that they are finding creative ways to make this much harder than it has to be on purpose. On thing that stood out to me is, instead of all the tiny screws being the same size, there are about two dozen very slightly different sizes. They could easily be all the same size, or like, two sizes at most, but no.
These mother fuckers will take a panel that screws into place and they’ll use a different size screw for each corner. They are so close that you almost cannot tell them apart visually, but they each will only screw into the matching corner. Like, it’s a pretty clear “fuck you” to anyone trying to do repairs.
anyway, this guy is also fueled by spite, and doing holy work, and I have mad respect
This is awesome. Man is doing good ass deeds 24/7 because he’s giving people control.
How dare you not leave a link to his channel, this guy is the savior of the modern world.
wish i’d seen this before i threw away my old mac because it would cost more to repair it than to just buy a new laptop
That’s Louis Rossman, a repair technician and YouTuber, who went viral recently for railing against Apple. Apple purposely charges a lot for repairs and you either have to pay up or buy a new device. That’s because Apple withholds necessary tools and information from outside repair shops. And to think, we were just so close to change.
Follow @the-future-now
Reblog if you:
No one will know which is it
This guy inspired me to repair my own macbook. First of all, you should know that I am not… like, I have to look up HOW to look up what my computer specifications are. Tech, that ware either soft or hard, is not a subject in which I experience comfort or competence. But my puppy peed on my keyboard, and I asked the apple store, or the fucking mac cafe, or the godsdamn Computer House Chill Zone or whatever cute ass name they have for their bullshit store, and they said it would be TWELVE HUNDRED DOLLARS TO REPLACE MY KEYBOARD. I’m not even exaggerating.
So I asked the internet, well how hard IS it to repair? And I saw this guy’s video, and while I am no techie, I AM fueled by spite, so I was all “oh, they do that shit on purpose specifically so they can charge me $1200 bucks or make me buy a new computer hunh? FUCK THEM” and I bought all the tools I needed for about $25 and I bought all the parts I needed for about another $25 and I watched a few tutorial videos, and I replaced my own keyboard.
So, once you are doing the actual deed, it becomes pretty obvious that they are finding creative ways to make this much harder than it has to be on purpose. On thing that stood out to me is, instead of all the tiny screws being the same size, there are about two dozen very slightly different sizes. They could easily be all the same size, or like, two sizes at most, but no.
These mother fuckers will take a panel that screws into place and they’ll use a different size screw for each corner. They are so close that you almost cannot tell them apart visually, but they each will only screw into the matching corner. Like, it’s a pretty clear “fuck you” to anyone trying to do repairs.
anyway, this guy is also fueled by spite, and doing holy work, and I have mad respect
This is awesome. Man is doing good ass deeds 24/7 because he’s giving people control.
How dare you not leave a link to his channel, this guy is the savior of the modern world.
wish i’d seen this before i threw away my old mac because it would cost more to repair it than to just buy a new laptop
Light of Love
you ever just hand things to ur pet to sniff so they can feel included
Keeping a sketchbook for a college course. Still on my Tarzan bullshit!
13-4-20
Head portraits of Lythronax & Thanatotheristes
I took the time to paint some dinosaur heads in my sketchbook with acrylic paint. The Thanatotheristes below the Lythronax isn’t finished yet because I am not sure about which colors and patterns I should pick.
14-4-20